Solid - Liquid Separators TZ-1200

This vibrating screen solid/liquid separator is special for the separation of slurry from various sectors that have a very high moisture and liquid component, without ruling out the possibility of being used for cow slurry. It begins its process by feeding it with a submersible pump with a grinder in the septic tank or in the slurry accumulation pool that sends it to the separator feeding inlet. The rotary pressure oblique screen system is superior to the spiral screen dehydrator.

At the front is the pure copper vibrating motor, the vibrating sieve plate, the speed reducer and the extrusion drying oven; and in the rear part it has the slurry inlet access and the separate water outlet.

Its extrusion process is by screw. This is double helix, with main material in 304 stainless steel; The wear-resistant edge is made of high-hardness alloy with special treatment that doubles its service life. The filter is also made of wedge-shaped stainless steel. It has good tensile effect, anti-clogging, high-precision molding, reducing the load on the motor and prolonging its service life. The electrical panel and distribution box have compact structure, great versatility, and simple and convenient operation.

The processing capacity is high, the solid loss is small, the solid content of the separated water after treatment can be less than 1%. It has high corrosion resistance as it is made entirely of 304 stainless steel. The operation is easy, the operation is simple, and its installation space is small.

The resulting liquid is used as a liquid fertilizer to be applied directly to the fields or diluted with irrigation water. It facilitates its pumping and fertigation through irrigation sprinklers or injection into the earth, but with one more advantage, that the same amount of slurry required for its discharge on farmland as required by law for compliance with environmental regulations, requires 20% less unloading area.

This 20%, which is the percentage of nitrogen decreased in the separation, reduces the dimension of the accumulation ponds, no crusts are generated that solidify the surface of the ponds, there is less risk of breakage, leaks, savings in maintenance costs and of transport as the transport volume is smaller and the load is easier. And another socially and environmentally important advantage is the undoubted reduction in odor.

The separation rate of suspended solids and sediments can reach more than 95% for the floating solids in the slurry, allowing to obtain up to 30%-35% of dry matter from the separated solid, and reduces total nitrogen by 20%, 50% of the total phosphorus and 20% of the total potassium that the slurry had before separation.